Tag Archives: Trypticon

Video – My 100+ Generations Decepticons

For a bit of fun and a bit of comparison I pulled out of my storage crates a lot of my Decepticons.  In particular, toys that were updates of classic characters, mainly (but not exclusively) from G1.    I was amazed and how many characters have gotten new toys!

So enjoy this short video I made of the display.  Also below you will find some screenshots and a full list of the Decepticons on display along with links to reviews of many of the figures displayed here – have fun!

 

 

 

 

Acid Storm, Apeface, Astrotrain, Axor,

Banzaitron, Battletrap, Bonecrusher, Black Arachnia, Blast Off, Blitzwing, Bludgeon, Bombshell, Breakdown, Brawl, Bruticus, Buzzsaw,

Caliburst, Catgut, Chop Shop, Cyclonus,

Darkmount, Darkwing, Dead End, Devestator, Dirge, Doubledealer, Drag Strip, Dreadwind, Dreadwing,

Fangry, Frenzy, Full-Tilt, 

Galvatron, Gnaw, Grabuge

Hook, Hun-Grrr, 

Jhaixus,

Kickback, Krok,

Laserbeak, Leozack, Liokaiser, Long Haul,

Megatron, Menasor, Mindwipe, Misfire, Mixmaster, Motormaster,

Needlenose, Nightbird, Nightstick, Nemesis Striker,

Octone, Onslaught, Overkill, Overlord

Pounce

Quake

Ramjet, Rampage, Ratbat, Ravage, Rippersnapper, Rodimus Unicronus, Rumble, Runabout

Scavenger, Scourge, Scorponok, Scrapper, Shockwave, Singe, Sixshot, Shrute, Skrapnel, Skullgrin, Skullsmasher, Sky Byte, Sky Shadow, Skywarp, Slice, Slipstream, Slugslinger, Soundblaster, Soundwave, Spinister, Starscream, Submarauder, Sunbeam, Swindle

Tankorr, Thrust, Thundercracker, Thunderwing, Treadshot, Triggerhappy, Trypticon

Vortex

Waspinator, Wildrider, WingspanWindsweeper, Wolfwire,

Zputty

Video: Comparison of LG43 Trypticon and Titans Return Trypticon

Due to people really enjoying the written review I did showcasing the differences (were there any?) between the Legends and Titans Return versions of Trypticon, I have followed it up with a short video comparison of the two – enjoy!

 

 

Related Articles:

Toy Review: LG43 Trypticon vs Titans Return Trypticon

Transformatorium: Titans Return Trypticon – the simple hip fix!

 

 

Toy Review – LG43 Trypticon vs Titans Return Trypticon

When I wrote the comparison blog between Takra Tomys Unite Warriors Computron and Hasbro’s Combiner Wars Computron it took me about two days to take all the pictures, write up all the subtle differences and overall decide which set was better.

With Legends Trypticon and Titans Return Trypticon?  I should be done by the end of the commercial break.

 

Here is a comparison of the boxes, the boxes are indeed different.

 

Here are the instructions for the Legends version that have a comic on the back.  That’s kinda different.

To read the English translation of this comic – check it out on Tets Toys HERE.

Here are the sticker sheets.  The stickers are exactly the same, though I suppose the size of the sheet they come on is different, I guess.

Kinda like getting the exact same meal but on two different types of plate.

The way the Legends version and the Titans Return version have been strapped in their boxes is different in layout I suppose.

Takara Tomy packing method
Hasbro packing method

 

Now to Trypticon himself, the differences are…. they are…. um….

‘One of these Cons is not like the other one…. oh wait’

The differences are non-existent!

 

That’s right kiddies – there is absolutely no difference between the two versions – none!  All the things you may have previously been lead to believe, such as the teal was darker and the purple richer in the Legends version are not correct.  That the paint apps are built in and you don’t have to apply stickers like the Hasbro version – false.  The only way I could keep the two from getting mixed up when taking photographs was that I had already applied some of the stickers to the Titans Return version.  The same goes for their smaller partners.

Full-Tilt vs Full-Tilt. No difference
Necro vs Titan Master: Difference in name only

 

In the end I didn’t even bother transforming the Legends version.  I packed it straight back in its box and am going to carefully store it for a decade so hopefully I can in the future sell it (and make back the extra $80 I paid getting it shipped from Japan) as relatively MIB.  In a day and age where toy producers are conscious that some collectors will shell out big money for multiple versions of an expensive toy for even the slightest difference, I was honestly surprised there was none here.  Not even an extra gun like Metroplex or a new hat like Malibu Stacy!

Is one worth getting over the other?  Nope.  The only thing is that some of the Titans Return versions have the dodgy hips (for an excellent way to fix that see HERE) whereas none of the LG43 versions have had that problem reported as yet.  So if the fact you don’t have to worry about this possible defect is worth the extra costs of shipping to you then grab that one.  Otherwise, unless you are rolling in cash and want to have both types of box to display, go down to your local toy store and grab the Hasbro one.

 

‘I’m Trypticon’
‘No, I’m Trypticon!’

 

Got something to add?  Would love to read it in the comments section below!

 

Related Articles:

Transformatorium: Titans Return Trypticon – the simple hip fix!

Video: Comparison of LG43 and Titans Return Trypticon

 

Titans Return Trypticon – the simple hip fix!

Trypticon – the big bad!  The latest Titan Figure for the Titans Return line and the biggest Decepticon toy ever created!

However this titan has a titanic problemhis hips!

 

Though they are cropping up far less (still occasionally however) in later waves, the first batch of this toy came with some major issues that were in turn causing major damage to a pretty expensive toy.  These problems were:

1: The springs in the hips were far too strong and causing damage to the workings inside.

2: The teeth on the ratchet system for the hips were too big and would more often than not lock together instead of sliding over one another.

 

There have been quite a few fixes to these problems crop up on various Transformer sites and youtube.  These have ranged from cutting the springs in half to address the strength issue to filing down the teeth of the ratchet.  Some people have even removed the spring and half the ratchet altogether and replaced them with cardboard disks in order to turn the hips into a swivel system.

Well I am here to give you what I believe is the easiest answer to the spring and ratchet problems and guess what?  No cutting, filing or permanent removal of parts is necessary!  Follow the below instructions and your Trypticon will be ready to start smashing bots instead of his own hips in no time!

 

Before I start I would like to thank Grant in Blacktown and Michael in Melbourne for this.  Grant was the one who came across the method of fixing the spring and Michael created the solution to the ratchet teeth issue.  Well done guys – you both rock!

 

Tools:

1 Screwdriver

1 Pair of Scissors

1 Marker Packet

1 Black Marker

 

Method:

Step 1: Remove Trypticon from his box.  Note that his legs come unattached.  Do not attach them yet.  Even if you believe your Trypticon may be one of the ones sans the spring/ratchet issues I recommend being safe rather than sorry. Use scissors to cut the ties and take out the legs.

 

Step 2: Take your screwdriver and remove the two screws from the teal bracket.  Loosen the 3rd screw on top and remove the bracket completely.

 

Step 3: Remove the two screws from the black ratchet cover.  Be ready because the ratchet is underneath and the pressure from the overpowered spring will launch it sky high if you let it.  Have a finger ready to suppress its firing.

 

Step 4: Remove the two parts of the ratchet and the spring.  Now do the same for the second leg.  You should end up with a bunch of parts looking like this:

 

Step 5: Now to solving the problem.  First the spring.  No need to cut it, all you need to do is squeeze it.  10 minutes of compressing and relaxing the spring in your hand will take a bunch of the tension out of it.  Do one spring for 10 minutes and then see if it feels weaker than the spring you haven’t touched yet.  If so then you have done it right.  Personally I find watching an episode of Rick & Morty to be a good timer.  Half way through the episode change to the second spring.  Yes your fingers will get a tad tired (if you are a hardcore Transfan you have probably spent a hefty period of your life doing repetitive hand movements anyway) but persevere.  Once done replace the springs.

 

Step 6: Take your marker and draw an outline of the smaller ratchet piece on the plastic.  Then cut it out with your scissors.  Repeat.  This should leave you with two thin, malleable plastic dics.

 

Step 7: Take one plastic disk and put it on the smaller ratchet piece.  Then place the larger one on top.  The teeth of the ratchet will mush it into place where it will provide that bit less friction for the ratchets future operation.  Repeat with the second ratchet.

 

Step 8: Place the ratchet back on top of the spring and push down into place.  Put the ratchet cover over the ratchet and tighten the screws.  Reassemble the teal piece over the top making sure that the side with the 3rd screw hole is facing towards the back of Trypticon’s legs – it does make a difference when attaching to the main body.

 

Step 9: Attach the legs to the side of the body.  Rotate head and arms and stand up.

 

Step 10:

Go play with your awesome new toy without fear of it breaking itself!

 

And that’s it!  As stated – no cutting, filing or permanent removal of parts necessary.  Once again, many thanks to Grant and Michael.  I got my Trypticon the day he came out in Australia which almost garunteed he was one of the faulty batch and thusly I had been afraid to open him.  Now I can have some worry-free, titan-sized fun, as can you!

Got any other tips on how to fix a faulty Trypticon?  Write them in the comments section below!

 

Related Articles:

Toy Review – LG43 Trypticon vs Titans Return Trypticon

Video: Comparison of LG43 Trypticon and Titans Return Trypticon